This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.
Our picks are based on Amazon bestseller rankings, verified customer ratings, and product availability. We update our recommendations regularly to ensure accuracy.
A reliable heater hose is crucial for maintaining your vehicle's climate control system. A failing hose can lead to a significant loss of cabin heat and, in severe cases, engine overheating. Understanding the key features and considerations when selecting a replacement will ensure optimal performance and longevity for your car's heating system.
Heater hose compatible with enclave 2008-2017, acadia 2007-2017, traverse 2009-2017, outlook 2007-2010
Replacement part number: 20765678, 25862087, 25862088, 626-562
Made from plastic PA66 T-shaped connectors and rubber material. A slight odor upon receiving the heater hose is normal. Please open the packaging and air it out for 1-2 days
Easy to install: direct replace
We sincerely appreciate your purchase of engine heater hose set and the trust and support of iKer. Your satisfaction is our responsibility and honor
Upgraded replacement - this engine coolant overflow hose upgrades the failure-prone plastic Y-connectors on the original part to metal for greater durability
Application specific - made to match fit and function of the original hose on certain Ford Super Duty trucks
Professionally tested - this part was leak-tested in extreme heats to ensure proper performance
Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Application: Note that you can use our radiator hose for the transportation of water or gas in your vehicle's cooling system. But please don't use our radiator hose for oil to avoid causing safety problems, read the above information before purchasing
Product Specification: In the package we provide you with a 5 Ft heater hose, its ID*OD*Thickness is 0.74*1.09*0.16 inch, please refer to the above dimensions before purchasing, to avoid mismatch with your automotive system
Thermal Resistant Silicone: The use of silicone as the main material of radiator hoses allows them to withstand temperatures ranging from -58 to 392℉, and maintains good flexibility even under extreme temperature conditions. Avoid brittleness and...
Important: You may wish to review the following parameters. The hose has a polyester fiber lined cord that acts as a reinforcement to increase its rupture pressure to 650 PSI, a bend radius range of 78-79.5 mm, and a normal working pressure of 250 PSI
Cuttable Use: Easily replace new radiator hoses by cutting the hose to the proper length as needed, locating the hose and pulling out the old hose, and attaching the new hose to the fitting. Finally, check that the connection is tight
Application: Note that you can use our radiator hose for the transportation of water or gas in your vehicle's cooling system. But please don't use our radiator hose for oil to avoid causing safety problems, read the above information before purchasing
Product Specification: In the package we provide you with a 5 Ft heater hose, its ID*OD*Thickness is 0.62*0.94*0.18 inch, please refer to the above dimensions before purchasing, to avoid mismatch with your automotive system
Thermal Resistant Silicone: The use of silicone as the main material of radiator hoses allows them to withstand temperatures ranging from -58 to 392℉, and maintains good flexibility even under extreme temperature conditions. Avoid brittleness and...
Important: You may wish to review the following parameters. The hose has a polyester fiber lined cord that acts as a reinforcement to increase its rupture pressure to 650 PSI, a bend radius range of 78-79.5 mm, and a normal working pressure of 250 PSI
Cuttable Use: Easily replace new radiator hoses by cutting the hose to the proper length as needed, locating the hose and pulling out the old hose, and attaching the new hose to the fitting. Finally, check that the connection is tight
Direct replacement: Easy to install, no special tools required for installation.
High Quality: Engine Heater Inlet Hose was made from quality rubber, which has the characteristics of high temperature resistance and good toughness, can help keep the engine in good running condition.
Package List: 1x Heater Supply Hose & 2× HVAC Heater Inlet Hose Tee Connector (The corner of the white connector is a right angle, while the corner of the black connector is not a right angle).
Quality Material: Made of good quality rubber for stability and durability, high temperature and abrasion resistance, not easy to break, long service life
Reference OE Part Number: 5058437AD, 5058437AI, 5058437AK
Replace The Following Vehicle: Dodge Journey 2.4 VVT 2008-2020
Direct Fit: The same size as the original, direct replacement, fit was perfect, easy to install
Buy with Confidence: QFISH each item have passed quality inspection, If you have questions about the installation or the item, we are always here to answer them
Last update on 2026-07-18 / Affiliate links / Images from Amazon Product Advertising API
How to Choose the Best Automotive Replacement Heater Hoses
Installation Considerations
When replacing a heater hose, it's essential to use the correct clamps to secure it firmly to the heater core inlet and outlet fittings. Worm gear clamps or spring clamps are commonly used. Ensure the hose is properly seated and that the clamps are tightened appropriately to prevent leaks. It's also a good opportunity to inspect related components, such as the thermostat and radiator cap.
Frequently Asked Questions
How do I know if my heater hose needs replacing?
Signs of a failing heater hose include visible cracks, bulges, or softness in the rubber. You might also notice a sweet smell of coolant inside the car, or reduced heating performance. Leaks around the hose connections are another clear indicator.
Can I use a universal heater hose instead of a molded one?
Universal hoses can work in a pinch, but they often require cutting and fitting, which can lead to improper bends and potential kinks. A molded hose designed for your vehicle ensures a precise fit, preventing stress and ensuring optimal coolant flow.
What is the difference between rubber and silicone heater hoses?
Rubber hoses are the standard and generally more affordable option, offering good durability. Silicone hoses provide superior heat resistance and flexibility, making them ideal for high-performance or extreme temperature applications, but they typically come at a higher price point.
How long should a replacement heater hose last?
With proper installation and maintenance, a quality heater hose can last for several years, often matching the lifespan of the original equipment. Regular inspection for wear and tear will help ensure it performs reliably.
What type of clamps should I use for a heater hose?
Worm gear clamps are a popular and reliable choice for securing heater hoses, offering consistent pressure. Spring clamps can also be used, but it's crucial to ensure they are the correct size and provide adequate, even pressure to prevent leaks.
As an Amazon Associate, we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. Read our Privacy Policy
Before You Go!
Get the latest deals and product comparisons delivered to your inbox.
