This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases.
Our picks are based on Amazon bestseller rankings, Amazon customer ratings, and product availability. We update our recommendations regularly to ensure accuracy.
An LCR meter is an essential tool for measuring inductance (L), capacitance (C), and resistance (R). Accurate measurements are crucial for component testing, circuit design, and quality control in electronics manufacturing. Selecting the right LCR meter ensures reliable results and efficient workflow.
【Dual Parameter】FNIRSI LC1020E LCR Meter supports AUTO, Capacitance, Resistance, and Inductance with main/secondary parameters (X/D/Q/θ/ESR) shown simultaneously. Frequencies: 100Hz/120Hz/1kHz/10kHz/100kHz. 19,999-count display ensures precise...
【Smart Sorting】ESR Meter with Sorting & Comparison Mode calculates relative error (%) using preset nominal/tolerance (0.1%–99.9%) for accurate component screening. Alerts via sound/LED. Supports Capacitors 1pF–100mF, Resistors 10mΩ–10M...
【Reliable Testing】Capacitance meter supports open/short calibration, adjustable test voltage (0.1/0.3/0.6V) and internal bias (0.0/0.5V). Records if components meet preset nominal/tolerance, tracking success/fail counts. Data hold locks readings...
【User-Friendly】ESR meter capacitor tester features 3-pin sockets and 5-slot jacks for precise four-terminal (Kelvin) measurements with professional fixtures. 2.8” TFT display with 10-level brightness. 3000mAh battery with auto-off, Type-C...
This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel...
This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.
Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
The "Sorting"mode could help the user to make a quick sort for a bunch of components.
【WHY DO I NEED AN LCR METER ?】 – Standard multimeters struggle with accurate inductance readings and low-value capacitance. The BM4070 LCR meter is purpose-built for inductance (L), capacitance (C), and resistance (R) measurements. With 3 1/2 digit...
【CAPACITANCE: 200pF TO 2000μF – 8 RANGES】 – Measure everything from small ceramic discs to large electrolytic capacitors. 8 capacitance ranges: 200pF (0.1pF resolution, ±2.5%+5), 2nF, 20nF, 200nF, 2μF, 20μF, 200μF, and 2000μF (1μF...
【INDUCTANCE: 200μH TO 20H – 6 RANGES】 – Easily test inductors, chokes, transformers, and solenoid coils. 6 inductance ranges: 200μH (0.1μH resolution, ±3.0%+5), 2mH, 20mH, 200mH (all ±2%+5), 2H, and 20H (10mH resolution, ±5%+5). Essential...
【RESISTANCE & DIODE TESTING – 200Ω TO 20MΩ】 – Resistance measurements across 5 ranges: 200Ω (0.1Ω resolution, ±0.8%+2), 2kΩ, 20kΩ, 200kΩ (±0.8%+2), and 20MΩ (10kΩ resolution, ±1.5%+5). Also tests forward voltage drop of diodes (approx...
6000 counts auto-ranging Digital Multimeter with LCR meter for AC/DC voltage, current, resistance, inductance, frequency, duty cycle, diode & continuity.
Measures inductance, capacitance & resistance—a cost-effective entry-level LCR tester for DIY electronics and repair.
Quick, stable readings for inductance, capacitance, and electrical values—no complicated setup, perfect for fast troubleshooting.
Built-in non-contact voltage detection (NCV), plus backlight, flashlight, data hold, and auto power-off.
Specs: Basic accuracy 0.1%. Measurement frequency from 40Hz to 200kHz, in total 41 frequency points. 4.3 inch TFT LCD displayer, 5 digit display. 30Ω/100Ω 2 optional signal source output resistance
Measurement Range: L (0.01 μH - 99999 H). C (0.01 pF-9.9999 F). R, |Z|, X, ESR (0.1mΩ-99.999 MΩ). D (0.0001-9.9999). Q (0.0001-9999.9). θ(Deg) (-179.99°-179.99°). θ(Rad) (-3.1416-3.1416)
Accurate and Speed: Inductance meter with 32-bit core processor, high-precision computing power. 3 measure speed 30 times/s, 10 times/s and 3 times/s. Delay time 0-6s, step is 1ms. Average time 1-255
Data Saving: Digital LCR meter with RS232C, USB Host, Handler ports, support SCPI and GPIB. Software is provided to save the data to pc/usb stick. And the U disk copy screen function supports FAT16/32
Handheld LCR Tester for Accurate Component Testing – This digital LCR meter accurately measures capacitance (C), inductance (L), resistance (R), impedance (Z), and critical secondary parameters like Dissipation Factor (D), and Quality Factor (Q). It’s...
Auto-Component Identification & Large Clear Display – Speed up your workflow with intelligent auto-identification that instantly displays the primary component type (L, C, or R) and its key parameters. The large, backlit LCD screen clearly shows all...
USB Data Logger for PC Connectivity and Analysis – Go beyond basic measurements. Use USB cable (not included) to connect to your computer, log thousands of readings, and export data for in-depth analysis, reporting, or quality control documentation. It...
High Accuracy and Multi-Frequency Testing for Demanding Applications – Engineered for reliability in R&D, quality inspection, and field service. Offers selectable test frequencies (100Hz, 1KHz, and 10KHz) to meet different standards, ensuring accurate...
Transistor Capacitor Tester: FNIRSI LCR-P1 transistor tester can be used for the measurement and analysis of patch component, NPN, PNP, triode, MOS, field effect transistor (FET), diode, Zener diode, capacitor, resistor, inductor, battery, etc
Friendly Design: The design of the replaceable patch seat enables measurement of both tiny precision components and high-power devices. 1.44 inch full-color screen, 300 mah battery, Type-c interface for charging and data transmission, firmware upgrade
Anti-burn protection mechanism: The capacitance resistance esr tester automatically identifies undischarged capacitors and automatically discharges them at the moment of insertion and locking to prevent accidental damage
NEC Infrared Waveform: FNIRSI LCR-P1 transistor detector supports the analysis of NEC infrared protocol code, so it can be used for the debugging and maintenance of remote control equipment, and provides users with comprehensive detection and analysis
【All-in-One】FNIRSI LCR-ST2 LCR Meter for SMD & through-hole parts. Measures resistors, capacitors, inductors, diodes, continuity, voltage. Smart auto sorting identifies abnormal components. 100 Hz/120 Hz/1 kHz/10 kHz/100 kHz full-range scan for RF to...
【Precise & Reliable Testing】Four RMS test levels (0.1 / 0.3 / 0.6 / 1.0 V) with series/parallel mode to reduce parasitic effects. Capacitors (1 pF–22 mF), resistors (10 mΩ–10 MΩ), inductors (1 μH–10 H), diodes (≤0.7 V), voltage (±30 V...
【Primary/Secondary Display】Auto measurement with primary parameters (R/C/L/Z) and secondary parameters (X/D/Q/θ) for thorough analysis and reliable testing. Ideal for electronics diagnostics and component verification
【Easy to Use & Read】Capacitor Tester with left/right-hand mode, 1.47" HD display, and adjustable brightness. Built-in 300 mAh rechargeable battery with Type-C charging and auto power-off. High-strength rear magnet keeps the meter secure and saves...
Complete Set Included: This set includes DE-5000 itself, TL-21 Alligator Test Lead, protective carrying case, and TL-22 SMD test leads for comprehensive testing capabilities
ISO 9001 Certified with Multiple Test Frequencies: Features automatic L.C.R. check functionality with 100Hz, 120Hz, 1kHz, 10kHz, and 100kHz test frequency options for versatile measurements
High Resolution Display: 20,000 and 2,000 counts display with backlit screen for easy reading in various lighting conditions
Comprehensive Measurement Modes: Supports Ls, Lp, Cs, Cp, Rs, Rp, and DCR measurements with D, Q, phase angle, and ESR parameters, plus relative mode for differential measurements
Last update on 2026-10-09 / Affiliate links / Images from Amazon Product Advertising API
How to Choose the Best LCR Meters
Accuracy and Measurement Range
Consider the required accuracy for your applications. Higher accuracy often comes with a higher price tag. Ensure the meter's measurement range covers the inductance, capacitance, and resistance values you typically work with. Some meters offer different accuracy classes, so match this to your precision needs.
Frequency and Test Signal
LCR meters test components at various frequencies. The test frequency capability should align with the frequencies at which your components are expected to operate or be tested. Also, look at the test signal level, as some sensitive components require specific signal amplitudes to avoid damage or inaccurate readings.
Features and Connectivity
Advanced features can enhance usability and data analysis. Consider options like auto-ranging, component sorting, and built-in test fixtures. Connectivity features, such as USB or GPIB interfaces, are valuable for data logging and integration into automated test systems.
Frequently Asked Questions
What is the primary function of an LCR meter?
An LCR meter is designed to measure the inductance (L), capacitance (C), and resistance (R) of electronic components. It provides precise values for these fundamental electrical properties.
How often should an LCR meter be calibrated?
Calibration frequency depends on usage and environmental factors, but typically annual calibration is recommended. This ensures the meter maintains its accuracy and reliability over time.
What's the difference between an LCR meter and a multimeter?
While a multimeter measures basic electrical properties like voltage, current, and resistance, an LCR meter specializes in measuring inductance and capacitance in addition to resistance. It offers higher precision for these specific measurements.
Can an LCR meter test capacitors and inductors in-circuit?
Some advanced LCR meters can perform in-circuit measurements, but accuracy can be affected by surrounding components. For precise readings, it is generally recommended to test components out-of-circuit.
As an Amazon Associate, we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Before You Go!
Get the latest deals and product comparisons delivered to your inbox.
