Powersports vehicles often encounter rough terrain, making CV boots and joints critical components for reliable operation. Protecting these vital parts from dirt, debris, and extreme temperatures is essential to prevent costly damage and ensure your vehicle's longevity. Understanding the nuances of selecting the right replacement parts can save you time and money in the long run.
- SUPERIOR SPECS & FUNCTION: CV Boot Kit, Notes: The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATV’s and UTV’s., Easier to install than most OEM...
- OEM REPLACEMENT: 100% New Aftermarket CV Boot Kit built to meet OEM specifications
- ENGINEER-TESTED EXCELLENCE: All of our wiring products go through a rigorous testing program developed by prestigious engineers to ensure optimal output and performance.
- MECHANICS CHOICE: Our key to success is selling parts that fit and perform like the originals, which is why beginner and professional mechanics make us their top choice. We offer electrical parts and motors for your car, electric lawn mower, truck, boat...
- Compatible with OEM Parts Arctic Cat 1436-207
- Compatible with Arctic Cat 2003-2005 250 2x4, 2003-2005 250 4x4, 2003-2005 300 4x4, 2003 300 2x4, 2002-2005 400 4x4, 2002-2004 400 2x4
- Compatible with Arctic Cat 2002-2005 500 4x4, 2003-2004 500 TBX, 2003-2004 500 TRV, 2005 650 H1 4x4, 2004-2005 650 V-2 4X4
- Boot Clamp Gauge 0.36mm
- Expandable universal CV boot replacement designed to expand over cone tool found in EZ trail boot kit.
- Material is expandable yet tough enough t -be a permanent fix.
- Boot material stays flexible extreme cold temperatures.
- Compatible with OEM Parts Arctic Cat 1436-207, 1436-228
- Compatible with Arctic Cat 1999-2002 250 2x4, 2001-2002 250, 1998-2002 300 2x4, 1998-2002 300 4x4, 2002 375 2x4, 2002 375 4x4
- Compatible with Arctic Cat 1998-2002 400 4x4, 2001-2002 400 2x4, 1998 454 4x4, 1998-2002 500 4x4
- Boot Clamp Gauge 0.36mm
- Specifications: Axle boot is 4.72 inch in length and small port inside diameter is 0.78 inch, and contains three different calibers: 2.55 inch/65 mm, 3.14 inch/80 mm and 3.54 inch/90 mm. Please check the size data you need before purchase
- You Will Get: 2 CV joint boot, 4 stainless steel clamps and 6 cable ties. Suitable for most vehicles. Installation is simple, you simply remove the old or worn CV boot, and then use the mounting cone to put the new CV axle boot into the axle
- Excellent Protection: The CV axle boot acts like a sturdy shield, providing full protection. It can effectively prevent the intrusion of dust, sand, water and other impurities, and at the same time, avoid the overflow of grease from the ball cage
- Good Quality: Made of quality silicone material, with excellent wear resistance, high temperature resistance. The softness and elasticity of the silicone allows the CV boot to fit tightly and not loosen or fall off due to the vibration of the vehicle
- Compatible with OEM Parts Arctic Cat 2436-112
- Compatible with Arctic Cat 2014-2018 Wildcat 4X 1000, 2013-2018 Wildcat X 1000, 2013-2014 Wildcat 4 1000
- Compatible with Arctic Cat 2012-2015 Wildcat 1000, 2012 Wildcat 1000 GT
- Boot Clamp Gauge 0.36mm
- This split CV axle boot offers stretchable height from 2.28 in to 5.04 in, fits axle shafts ranging from 0.87 in to 1.10 in. Suitable for select Cars, Trucks and SUVs. Please verify dimensions prior to purchase to prevent improper fitment caused by...
- Constructed from premium tough rubber material, the boot is resistant to extreme temperature, UV rays, oil and grit erosion, anti-crack and anti-hardening for prolonged service life, blocking mud and grit to shield inner CV joint
- Full split tongue-and-groove structure realizes convenient installation without removing drive axle or CV joint, the stretchable boot can be trimmed appropriately to replace cracked original CV boot for DIY maintenance
- The flexible CV boot stretches and bends as the axle shifts angles during steering and bumpy rides, blocking contaminants to cut down steering noise and component wear
- Abrasion resistant to ensure long life in todays harsh off road environments
- Rubber compound is tested to -40 F to assure good performance in cold temperatures
- 1-year warranty protects you after your purchase warranty protects you after your purchase protects you after your purchase
- 40 Percent Higher tensile strength
- Provides long-lasting lubrication
- Highly heat resistant
- Packaged in a handy 3-oz. pouch, just the right amount for servicing one joint
- Also included with Dorman's CV Joint Boot Kit
- SUPERIOR SPECS & FUNCTION: CV Boot Kit, Notes: The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATV’s and UTV’s., Easier to install than most OEM...
- OEM REPLACEMENT: 100% New Aftermarket CV Boot Kit built to meet OEM specifications
- ENGINEER-TESTED EXCELLENCE: All of our wiring products go through a rigorous testing program developed by prestigious engineers to ensure optimal output and performance.
- MECHANICS CHOICE: Our key to success is selling parts that fit and perform like the originals, which is why beginner and professional mechanics make us their top choice. We offer electrical parts and motors for your car, electric lawn mower, truck, boat...
This article is part of our complete guide Shoes & Footwear — browse all our comparisons and buying guides.
Last update on 2026-10-17 / Affiliate links / Images from Amazon Product Advertising API
How to Choose the Best Powersports CV Boots & Joints
Understanding CV Boots and Joints
Constant Velocity (CV) joints allow your powersports vehicle's drivetrain to transmit power while accommodating suspension movement. The CV boot, a flexible rubber or neoprene covering, shields the joint from contaminants. When a boot tears, dirt and water can quickly degrade the joint, leading to failure. Replacing a torn boot promptly is crucial to prevent further damage to the CV joint itself.
Materials Matter
CV boots are typically made from neoprene or thermoplastic elastomers (TPE). Neoprene offers good resistance to oil, ozone, and abrasion, making it a durable choice for many applications. TPE materials can provide excellent flexibility, even in very cold temperatures, which is beneficial for vehicles used in diverse climates. Consider the operating environment of your powersports vehicle when choosing the material.
Types of Replacements
When replacing a CV boot, you have a few options. Full replacement kits include the boot, clamps, and often grease. Some universal kits are designed to fit a range of vehicles, offering convenience if a specific OEM part isn't readily available. Another option is a split boot, which can be installed without removing the axle shaft, a significant time-saver in certain situations.
Installation Considerations
Proper installation is key to the longevity of any CV boot. Ensure the axle shaft is clean before fitting the new boot. Use the provided clamps to secure the boot tightly, preventing any ingress of dirt or moisture. If you're not comfortable with mechanical tasks, it's advisable to seek professional installation to avoid premature failure.
Comparison Tips
- Check compatibility: Always verify that the boot or joint is designed for your specific make, model, and year of powersports vehicle.
- Inspect joint condition: If replacing a boot, carefully inspect the CV joint for signs of wear or damage. If the joint is compromised, it will need replacement as well.
- Consider kit contents: Ensure replacement kits include all necessary components, such as boots, clamps, and appropriate grease.
- Read reviews: Look for feedback from other powersports enthusiasts regarding the durability and fitment of different brands.
